Determination of the physical, chemical and mechanical properties of ground materials is the key to successfully deliver such projects as slope stabilization, excavation and lateral support, foundation etc. A book containing both theory of geomaterial testing and up-to-date testing methods is much in demand for obtaining reliable and accurate test results. This book is intended primarily to serve this need and aims at the clear explanation, in adequate depth, of the fundamental principles, requirements and procedures of soil and rock tests.

It is intended that the book will serve as a useful source of reference for professionals in the field of geotechnical and geological engineering. It can work as a one-stop knowledge warehouse to build a basic cognition of material tests on which the readers are working. It helps college students bridge the gap between class education and engineering practice, and helps academic researchers guarantee reliable and accurate test results. It is also useful for training new technicians and providing a refresher for veterans. Engineers contemplating the ICE, IOM3 and other certification exams will find this book an essential test preparation aid. It is assumed that the reader has no prior knowledge of the subject but has a good understanding of basic mechanics.

Table of contents :
Handbook of Geotechnical Testing

PART I Theory of geotechnical testing
1 Characteristics of soils
1.1 Basic properties and engineering classification
1.2 Stress in soil
1.3 Compressibility and consolidation
1.4 Strength of soils
2 Characteristics of rocks
2.1 Physical properties
2.2 Deformability of rocks
2.3 Rock strengths
2.4 Theory of rock strength
3 Characteristics of rock mass
3.1 Discontinuities in rock mass
3.2 Description of rock mass
3.3 Engineering classification of rock mass
3.4 Strength theory of rock mass
PART II Test methods for soils and rocks
4 International standard systems
4.1 Introduction
4.2 International standards
5 Test preparation
5.1 Application scopes and parameters to be measured
5.2 Apparatus and reagent
6 Procedures of tests on soils
6.1 Specimen preparation
6.2 Tests for physical properties
6.3 Tests for mechanical properties
6.4 Tests for chemical properties
7 Procedures of tests on rocks
7.1 Requirements of specimen
7.2 Description of specimens
7.3 Physical tests
7.4 Mechanical tests
8 Data analysis and documentation of geotechnical testing
8.1 Physical tests on soils
8.2 Mechanical tests on soils
8.3 Chemical tests on soils
8.4 Physical tests on rocks
8.5 Mechanical tests on rocks
PART III Comparison of test standards
9 Comparison of test methods for soil
9.1 Chemical tests
9.2 Physical tests
9.3 Mechanical tests
10 Comparison of rock tests
10.1 Physical tests on rocks
10.2 Mechanical tests on rocks
PART V Appendices
Appendix I Reference value of basic parameters of soil
1.1 Engineering classification of soils
1.2 The state division of soil
1.3 Physical and mechanical parameters of soil
1.4 Chemical parameters of soil
Appendix II Reference value of basic parameters of rock
2.1 Engineering classification of rock
2.2 Physical and mechanical parameters of rock
2.3 Dynamic parameter
Appendix III Basic geotechnical engineering terms
3.1 Physical index
3.2 Mechanical index
3.3 Thermal index
3.4 Chemical index
Appendix IV Common physical quantities and unit conversion for geotechnical testing


TitleHandbook of Geotechnical Testing: Basic Theory, Procedures and Comparison of Standards
AuthorYanrong Li (Author)
ISBNISBN-13: 978-0367340643 ISBN-10: 036734064X
Size 12 MB
Download MethodDirect Download  

Source link

Leave a Reply

Your email address will not be published. Required fields are marked *