References Adomako, S., C. J. Engelsen, R. T. Thorstensen, and D. M. Barbieri. 2021. “Review of the relationship between aggregates geology and Los Angeles and micro-Deval tests.” Bull. Eng. Geol. Environ. 80 (1): 1963–1980. Alazigha, D. P., B. Indraratna, J. S. Vinod, and A. Heitor. 2018. “Mechanisms of stabilization of expansive soil with lignosulfonate admixture.” Transp. Geotech. 14 (Mar): 81–92. Araya, A., A. Molenaar, and L. Houben. 2010. “Characterization of unbound granular materials using repeated load CBR and triaxial testing.” In Proc., GeoShanghai Int. Conf. 2010: Paving Materials and Pavement Analysis, edited by B. Huang, E. Tutumluer, I. L. Al-Qadi, P. Jorge, and X. Shu, 355–363. Reston, VA: ASCE. Arulrajah, A., J. Piratheepan, M. M. Disfani, and M. W. Bo. 2013. “Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications.” J. Mater. Civ. Eng. 25 (8): 1077–1088. Baghini, M. S., A. Ismail, M. P. Asghar, G. Fendereski, and M. Sadeghi. 2018. “Measuring the effects of styrene butadiene copolymer latex-portland cement additives on properties of stabilized soil-aggregate base.” Int. J. Pavement Res. Technol. 11 (5): 458–469. Baghini, M. S., A. Ismail, S. S. Naseralavi, and A. A. Firoozi. 2016. “Performance evaluation of road base stabilized with styrene–butadiene copolymer latex and portland cement.” Int. J. Pavement Res. Technol. 9 (4): 321–336. Bansal, A., T. Goyal, and U. Sharma. 2020. “Enhancement of sub-grade soil strength with additives: Cement and molasses.” In Proc., 3rd Int. Conf. on Innovative Technologies for Clean and Sustainable Development, edited by D. K. Ashish, J. de Brito, and S. K. Sharma, 35–47. Cham, Switzerland: Springer. Barati, S., P. Tabatabaie Shourijeh, N. Samani, and S. Asadi. 2020. “Stabilization of iron ore tailings with cement and bentonite: A case study on Golgohar mine.” Bull. Eng. Geol. Environ. 79 (Oct): 4151–4166. Barbieri, D. M., J.-G. Dorval, B. Lou, H. Chen, B. Shu, F. Wang, and I. Hoff. 2021a. “Dataset regarding the mechanical characterization of sedimentary rocks derived from Svalbard for possible use in local road constructions.” Data Brief 34 (Feb): 106735. Barbieri, D. M., I. Hoff, and H. Mork. 2017. “Laboratory investigation on unbound materials used in a highway with premature damage.” In Proc., 10th Int. Conf. on the Bearing Capacity of Roads, Railways and Airfields. Boca Raton, FL: CRC Press. Barbieri, D. M., I. Hoff, and M. B. E. Mørk. 2019. “Mechanical assessment of crushed rocks derived from tunnelling operations.” In Proc., 5th GeoChina Int. Conf. 2018, edited by W.-C. Cheng, J. Yang, and J. Wang, 225–241. Cham, Switzerland: Springer. Barbieri, D. M., I. Hoff, and M. B. E. Mørk. 2020a. “Organosilane and lignosulfonate as innovative stabilization techniques for crushed rocks used in road unbound layers.” Transp. Geotech. 22 (Mar): 100308. Barbieri, D. M., B. Lou, F. Wang, I. Hoff, S. Wu, J. Li, H. R. Vignisdottir, R. A. Bohne, S. Anastasio, and T. Kristensen. 2021b. “Assessment of carbon dioxide emissions during production, construction and use stages of asphalt pavements.” Transp. Res. Interdiscip. Perspect. 11 (Sep): 100436. Barbieri, D. M., M. Tangerås, E. Kassa, I. Hoff, Z. Liu, and F. Wang. 2020b. “Railway ballast stabilising agents: Comparison of mechanical properties.” Constr. Build. Mater. 252 (Aug): 119041. Beaulieu, L., R. Pleau, P. Pierre, P. Poulin, and S. Juneau. 2014. “Mechanical performance in field conditions of treated and stabilized granular materials used in unpaved roads: A longitudinal study.” Can. J. Civ. Eng. 41 (2): 97–105. Blanck, G., O. Cuisinier, and F. Masrouri. 2014. “Soil treatment with organic non-traditional additives for the improvement of earthworks.” Acta Geotech. 9 (6): 1111–1122. Bolander, P. 1999. “Laboratory testing of nontraditional additives for stabilization of roads and trail surfaces.” Transp. Res. Rec. 1652 (1): 24–31. Bost, P., M. Regnier, and M. Horgnies. 2016. “Comparison of the accelerating effect of various additions on the early hydration of portland cement.” Constr. Build. Mater. 113 (Jun): 290–296. CEN (European Committee for Standardization). 2003. Test methods for laboratory reference density and water content—Vibrating hammer. ISO 13286-4. Brussels, Belgium: CEN. CEN (European Committee for Standardization). 2004. Cyclic load triaxial test for unbound mixtures. ISO 13286-7. Brussels, Belgium: CEN. CEN (European Committee for Standardization). 2006. Building automation and control systems (BACS). Part 3: Functions. ISO 16484. Brussels, Belgium: CEN. CEN (European Committee for Standardization). 2010. Tests for mechanical and physical properties of aggregates. Part 2: Methods for the determination of resistance to fragmentation. ISO 1097-2. Brussels, Belgium: CEN. CEN (European Committee for Standardization). 2020. Determination of the affinity between aggregate and bitumen. ISO 12697-11. Brussels, Belgium: CEN. Collins, R., M. Zhang, L. Hulsey, and X. Zhang. 2014. “Stabilization of erodible slopes with geofibers and nontraditional liquid additives.” In Proc., Ground Improvement and Geosynthetics, edited by J. Han, A. J. Puppala, S. Shen, S. Oztoprak, and J. Huang, 414–424. Reston, VA: ASCE. Cong, L., F. Yang, G. Guo, M. Ren, J. Shi, and L. Tan. 2019. “The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review.” Constr. Build. Mater. 225 (Nov): 1012–1025. Cui, S., B. R. K. Blackman, A. J. Kinloch, and A. C. Taylor. 2014. “Durability of asphalt mixtures: Effect of aggregate type and adhesion promoters.” Int. J. Adhes. Adhes. 54 (Oct): 100–111. Daniels, J. L., and M. S. Hourani. 2009. “Soil improvement with organo-silane.” In Proc., Advances in Ground Improvement: Research to Practice in the United States and China, 217–224. Reston, VA: ASCE. Douglas, R. A. 2016. Low-volume road engineering. Boca Raton, FL: CRC Press. Du, S. 2018. “Mechanical properties and reaction characteristics of asphalt emulsion mixture with activated ground granulated blast-furnace slag.” Constr. Build. Mater. 187 (Oct): 439–447. Erichsen, E., A. Ulvik, and K. Sævik. 2011. “Mechanical degradation of aggregate by the Los Angeles, the micro-Deval and the Nordic test methods.” Rock Mech. Rock Eng. 44 (3): 333–337. Ghadimi, B., and H. Nikraz. 2017. “A comparison of implementation of linear and nonlinear constitutive models in numerical analysis of layered flexible pavement.” Road Mater. Pavement Des. 18 (3): 550–572. Gidel, G., P. Hornych, J.-J. Chauvin, D. Breysse, and A. Denis. 2001. “A new approach for investigating the permanent deformation behaviour of unbound granular material using the repeated loading triaxial apparatus.” Bull. Laboratoires Ponts Chaussees 233 (Jul): 5–21. Gomes Correia, A., M. G. Winter, and A. J. Puppala. 2016. “A review of sustainable approaches in transport infrastructure geotechnics.” Transp. Geotech. 7 (Jun): 21–28. Grenfell, J., N. Ahmad, Y. Liu, A. Apeagyei, D. Large, and G. Airey. 2014. “Assessing asphalt mixture moisture susceptibility through intrinsic adhesion, bitumen stripping and mechanical damage.” Road Mater. Pavement Des. 15 (1): 131–152. Hicks, R. G., and C. L. Monismith. 1971. “Factors influencing the resilient properties of granular materials.” Highway Res. Rec. 345: 15–31. Hoff, I., H. Arvidsson, S. Erlingson, L. J. M. Houben, P. Kolisoja, and C. W. Schwartz. 2005. “Round robin investigation on the cyclic triaxial test for unbound granular materials.” In Proc., 7th Int. Conf. on the Bearing Capacity of Roads, Railways and Airfields, edited by R. S. Nordal and G. Refsdal. Tapir, Trondheim: Tapir. Hoff, I., L. J. Bakløkk, and J. Aurstad. 2003. “Influence of laboratory compaction method on unbound granular materials.” In Proc., 6th Int. Symp. on Pavements Unbound. London: Taylor & Francis. Huang, Y. H. 2004. Pavement analysis and design. 2nd. ed. Upper Saddle River, NJ: Pearson Prentice Hall. Hyde, A. F. L. 1974. Repeated load triaxial testing of soils. Nottingham, UK: Univ. of Nottingham. Jiang, Y. J., and L. F. Fan. 2013. “An investigation of mechanical behavior of cement-stabilized crushed rock material using different compaction methods.” Constr. Build. Mater. 48 (Nov): 508–515. Jones, D. 2007. “Development of performance-based tests for nontraditional road additives.” Transp. Res. Rec. 1989 (1): 142–153. Jones, D. 2017. Guidelines for the selection, specification, and application of chemical dust control and stabilization treatments on unpaved roads. Rep. No. UCPRC-GL-2017-03. Berkeley, CA: Univ. of California. Jones, D., and R. Surdahl. 2014. “New procedure for selecting chemical treatments for unpaved roads.” Transp. Res. Rec. 2433 (1): 87–99. Jørgensen, T. 2002. “Testing adhesion between bitumen and aggregate with the rolling bottle test and the boiling test.” In Proc., 6th Int. Conf. on the Bearing Capacity of Roads, Railways and Airfields, edited by A. Gomes Correia and F. E. F. Branco. London: Taylor & Francis. Kamran, F., M. Basavarajappa, N. Bala, and L. Hashemian. 2021. “Laboratory evaluation of stabilized base course using asphalt emulsion and asphaltenes derived from Alberta oil sands.” Constr. Build. Mater. 283 (May): 122735. Kestler, M. A. 2009. Stabilization selection guide for aggregate- and native-surfaced low-volume roads. Washington, DC: USDA, Forest Service, National Technology & Development Program. Kim, J.-K., S. H. Han, and Y. C. Song. 2002. “Effect of temperature and aging on the mechanical properties of concrete: Part I. Experimental results.” Cem. Concr. Res. 32 (7): 1087–1094. Kumar, R., V. K. Adigopula Jr., and S. D. Guzzarlapudi. 2017. “Stiffness-based quality control evaluation of modified subgrade soil using lightweight deflectometer.” J. Mater. Civ. Eng. 29 (9): 04017137. Kunz, B. K., E. E. Little, and V. L. Barandino. 2021. “Aquatic toxicity of chemical road dust suppressants to freshwater organisms.” Arch. Environ. Contam. Toxicol. 82 (2): 1–2. Li, C., J. C. Ashlock, D. J. White, and P. K. R. Vennapusa. 2019. “Mechanistic-based comparisons of stabilised base and granular surface layers of low-volume roads.” Int. J. Pavement Eng. 20 (1): 112–124. Liu, Z., B. Lou, D. M. Barbieri, A. Sha, T. Ye, and Y. Li. 2020. “Effects of pre-curing treatment and chemical accelerators on portland cement mortars at low temperature (5°C).” Constr. Build. Mater. 240 (Apr): 117893. Lou, B., A. Sha, D. M. Barbieri, Z. Liu, and F. Zhang. 2021a. “Microwave heating properties of steel slag asphalt mixture using a coupled electromagnetic and heat transfer model.” Constr. Build. Mater. 291 (Jul): 123248. Lou, B., A. Sha, D. M. Barbieri, Z. Liu, F. Zhang, W. Jiang, and I. Hoff. 2021b. “Characterization and microwave healing properties of different asphalt mixtures suffered freeze-thaw damage.” J. Cleaner Prod. 320 (Oct): 128823. Lunsford, G. B., and J. P. Mahoney. 2001. Dust control on low volume roads: A review of techniques and chemicals used. Rep. No. FHWA LT-01-002. Seattle: Univ. of Washington. Mallick, R. B., and T. El-Korchi. 2013. Pavement engineering: Principles and practice. 2nd ed. Boca Raton, FL: CRC Press. Meijer, J. R., M. A. J. Huijbregts, K. C. G. J. Schotten, and A. M. Schipper. 2018. “Global patterns of current and future road infrastructure.” Environ. Res. Lett. 13 (6): 064006. Mgangira, M. B. 2009. “Properties controlling the resistance to abrasion and erosion of stabilized sandy soils using non-traditional additives.” In Proc., 17th Int. Conf. on Soil Mechanics and Geotechnical Engineering: The Academia and Practice of Geotechnical Engineering, edited by M. Hamza, M. Shahien, and Y. El-Mossallamy, 213–216. Amsterdam, Netherlands: IOS Press. M’Ndegwa, J. K. 2011. “The effect of cane molasses on strength of expansive clay soil.” J. Emerging Trends Eng. Appl. Sci. 2 (6): 1034–1041. Monlux, S., and M. Mitchell. 2007. “Chloride stabilization of unpaved road aggregate surfacing.” Transp. Res. Rec. 1989 (1): 50–58. Myre, J. 2000. The use of cold bitumen stabilized base course mixes in Norway, 1–14. Tallinn, Estonia: Baltic Road Association. NPRA (Norwegian Public Roads Administration). 2011. Håndbok N018 vegbygging. Oslo, Norway: Vegdirektoratet. NPRA (Norwegian Public Roads Administration). 2014. Håndbok N200 vegbygging. Oslo, Norway: Vegdirektoratet. NPRA (Norwegian Public Roads Administration). 2018. Håndbok N200 vegbygging. Oslo, Norway: Vegdirektoratet. Onyejekwe, S., and G. S. Ghataora. 2015. “Soil stabilization using proprietary liquid chemical stabilizers: Sulphonated oil and a polymer.” Bull. Eng. Geol. Environ. 74 (2): 651–665. Padmavathi, V., E. C. Nirmala Peter, P. N. Rao, and M. Padmavathi. 2018. “Stabilization of soil using Terrasil, Zycobond and cement as admixtures.” In Proc., Latest Thoughts on Ground Improvement Techniques. GeoMEast 2018, edited by H. Poulos, 163–170. Cham, Switzerland: Springer. Parsakhoo, A., S. A. Hosseini, M. Lotfalian, and M. Salarijazi. 2020. “Effects of molasses, polyacrylamide and bentonite on dust control in forest roads.” J. For. Sci. 66 (5): 218–225. Pierre, P., J.-P. Bilodeau, G. Légère, and G. Doré. 2008. “Laboratory study on the relative performance of treated granular materials used for unpaved roads.” Can. J. Civ. Eng. 35 (6): 624–634. Porot, L., J. Besamusca, H. Soenen, A. Apeagyei, J. Grenfell, and D. Sybilski. 2016. “Bitumen aggregate affinity—RILEM round robin test on rolling bottle test.” In Proc., 8th RILEM Int. Symp. on Testing and Characterization of Sustainable and Innovative Bituminous Materials, edited by F. Canestrari and M. N. Partl, 153–164. Dordrecht, Netherlands: Springer. Praticò, F., S. Saride, and A. J. Puppala. 2011. “Comprehensive life-cycle cost analysis for selection of stabilization alternatives for better performance of low-volume roads.” Transp. Res. Rec. 2204 (1): 120–129. Santoni, R. L., J. S. Tingle, and S. L. Webster. 2002. “Stabilization of silty sand with nontraditional additives.” Transp. Res. Rec. 1787 (1): 61–70. Shon, C.-S., D. Saylak, and S. K. Mishra. 2010. “Combined use of calcium chloride and fly ash in road base stabilization.” Transp. Res. Rec. 2186 (1): 120–129. Siripun, K., P. Jitsangiam, and H. Nikraz. 2010. “Characterization analysis and design of hydrated cement treated crushed rock base as a road base material in Western Australia.” Int. J. Pavement Res. Technol. 10: 39–47. Thom, N. 2014. Principles of pavement engineering. 2nd ed. London: Institution of Civil Engineers. Tingle, J. S., J. K. Newman, S. L. Larson, C. A. Weiss, and J. F. Rushing. 2007. “Stabilization mechanisms of nontraditional additives.” Transp. Res. Rec. 1989 (1): 59–67. Tingle, J. S., and R. L. Santoni. 2003. “Stabilization of clay soils with nontraditional additives.” Transp. Res. Rec. 1819 (1): 72–84. Titi, H. H., and M. G. Matar. 2018. “Estimating resilient modulus of base aggregates for mechanistic-empirical pavement design and performance evaluation.” Transp. Geotech. 17 (Dec): 141–153. Uthus, L., E. Tutumluer, I. Horvli, and I. Hoff. 2007. “Influence of grain shape and texture on the deformation properties of unbound aggregates in pavements.” Int. J. Pavements 6 (1): 75–87. Visser, A. T. 2007. “Procedure for evaluating stabilization of road materials with nontraditional stabilizers.” Transp. Res. Rec. 1989 (1): 21–26. Wang, F., J. Xie, S. Wu, J. Li, D. M. Barbieri, and L. Zhang. 2021. “Life cycle energy consumption by roads and associated interpretative analysis of sustainable policies.” Renewable Sustainable Energy Rev. 141 (May): 110823. Werkmeister, S., A. R. Dawson, and F. Wellner. 2001. “Permanent deformation behavior of granular materials and the shakedown concept.” Transp. Res. Rec. 1757 (1): 75–81. White, D., and P. Vennapusa. 2013. Low-cost rural surface alternatives: Literature review and recommendations. Rep. No. IHRB Project TR-632. Ames, IA: Iowa Highway Research Board, Iowa DOT. Xu, G., X. Ding, M. Kuruppu, W. Zhou, and W. Biswas. 2018. “Research and application of non-traditional chemical stabilizers on bauxite residue (red sand) dust control, a review.” Sci. Total Environ. 616–617 (Mar): 1552–1565. Xuan, D. X., L. J. M. Houben, A. A. A. Molenaar, and Z. H. Shui. 2012. “Mechanical properties of cement-treated aggregate material—A review.” Mater. Des. 33 (Jan): 496–502. Zang, Y.-X., W. Gong, H. Xie, B.-L. Liu, and H.-L. Chen. 2015. “Chemical sand stabilization: A review of material, mechanism, and problems.” Environ. Technol. Rev. 4 (1): 119–132.

Source link

Leave a Reply

Your email address will not be published. Required fields are marked *